Thanks Jose, I will fix that. Rookie mistake :-)Josep Roca wrote:@Paul
With the Quick Run option you're saving the contents to a temporary ansi file:
This won't work with unicode.Code: Select all
' Copy the contents of the active document to the temporary source file. f = freefile open gCompile.MainFilename for output as #f put #f, , pDocMain->GetText close #f
FreeBasic IDE-poseidonFB(Update 2024.03.03)
-
- Posts: 1001
- Joined: Jul 14, 2005 23:41
Re: FreeBasic IDE-poseidonFB(Update 2018.06.21)
Re: FreeBasic IDE-poseidonFB(Update 2018.06.21)
FBedit works fine on Windows 10, but unfortunately it doesn't really support Unicode. Thus if Unicode support is what you need you can skip trying FBedit. PoseidonFB has really grown to a good FB IDE - if not the best currently. Unfortunately the fact that it hasn't been written in FB also shows that current FB lacks features that would allow the development of such an IDE without a lot of extra effort (compared to other programming languages).dodicat wrote:I'll try a fresh fbedit again
Re: FreeBasic IDE-poseidonFB(Update 2018.06.21)
Is there anything I missed or why is the "compile and run" button not working properly anymore.
It compiles but doesn't start the compiled exe. I've to push always two buttons to start the exe.
Thx.
It compiles but doesn't start the compiled exe. I've to push always two buttons to start the exe.
Thx.
Last edited by UEZ on Jul 19, 2018 20:45, edited 1 time in total.
Re: FreeBasic IDE-poseidonFB(Update 2018.06.21)
Hi All
Yeah I have noticed that too, and in Linux I still have the long delay if the Parser
is turned on.
Regards
Yeah I have noticed that too, and in Linux I still have the long delay if the Parser
is turned on.
Regards
Re: FreeBasic IDE-poseidonFB(Update 2018.06.21)
Fixed at rev.402UEZ wrote:Is there anything I missed or why is the "compile and run" button not working properly anymore.
It compiles but doesn't start the compiled exe. I've to push always two buttons to start the exe.
Thx.
Re: FreeBasic IDE-poseidonFB(Update 2018.07.26)
Thx, button is working as expected again now.
Re: FreeBasic IDE-poseidonFB(Update 2018.07.26)
@Kuan Hsu
Here is the long awaited docs! Sorry for being late because I was quite busy with school.
Folder:
http://www.mediafire.com/?m9l5a9emg13c2
DOCX file
http://www.mediafire.com/file/t7hpo39ah ... .docx/file
PDF file
http://www.mediafire.com/file/6c74we939 ... B.pdf/file
Hope I did not make any mistake in translating it! If there's any please tell me!
Here is the long awaited docs! Sorry for being late because I was quite busy with school.
Folder:
http://www.mediafire.com/?m9l5a9emg13c2
DOCX file
http://www.mediafire.com/file/t7hpo39ah ... .docx/file
PDF file
http://www.mediafire.com/file/6c74we939 ... B.pdf/file
Hope I did not make any mistake in translating it! If there's any please tell me!
Re: FreeBasic IDE-poseidonFB(Update 2018.06.21)
(1)Set the "Include Levels" = 4Dinosaur wrote:Hi All
Yeah I have noticed that too, and in Linux I still have the long delay if the Parser
is turned on.
Regards
(2)Create new document
(3)Type
Code: Select all
#include "windows.bi"
It should has big different about "Enable Codecomplete At Back Thread" is on/off......
Re: FreeBasic IDE-poseidonFB(Update 2018.07.26)
謝謝, Thanks~~^^Takase wrote:@Kuan Hsu
Here is the long awaited docs! Sorry for being late because I was quite busy with school.
Folder:
http://www.mediafire.com/?m9l5a9emg13c2
DOCX file
http://www.mediafire.com/file/t7hpo39ah ... .docx/file
PDF file
http://www.mediafire.com/file/6c74we939 ... B.pdf/file
Hope I did not make any mistake in translating it! If there's any please tell me!
Re: FreeBasic IDE-poseidonFB(Update 2018.07.26)
Hi All
Kuan Hsu, I will stop using the Parser and Autocomplete in Linux, the same problems just keep happening.
With Auto Complete and Parser ON, I now have the program quitting in the middle of typing a udt name again.
This happened a few versions ago.
The only reason I used the parser was to have the current routine named in the top task bar.
I will just do without both.
Many thanks for your efforts anyway.
REgards
Kuan Hsu, I will stop using the Parser and Autocomplete in Linux, the same problems just keep happening.
With Auto Complete and Parser ON, I now have the program quitting in the middle of typing a udt name again.
This happened a few versions ago.
The only reason I used the parser was to have the current routine named in the top task bar.
I will just do without both.
Many thanks for your efforts anyway.
REgards
Re: FreeBasic IDE-poseidonFB(Update 2018.07.26)
Set the "Autocompletion Trigger" = 0 can disable autocomplete but show the parser tree in Outline and show the routine nameDinosaur wrote:Hi All
Kuan Hsu, I will stop using the Parser and Autocomplete in Linux, the same problems just keep happening.
With Auto Complete and Parser ON, I now have the program quitting in the middle of typing a udt name again.
This happened a few versions ago.
The only reason I used the parser was to have the current routine named in the top task bar.
I will just do without both.
Many thanks for your efforts anyway.
REgards
I am sorry that you got the issue, but in my test, I can't reproduce the issue at Linux Mint 18.3 and 19.0
Have a nice day!
Re: FreeBasic IDE-poseidonFB(Update 2018.07.26)
Hi All
Kuan Hsu that seems to work and sofar so good.
Just an observation:
When searching for a word (Find/Replace), the Routine/Function name window does not update.
So, if I have left the cursor in another routine I expected the cursor to follow the search steps to each word
and thus updating the Routine name window.
The search function fails when a routine is collapsed, so I have to expand all the routines to make sure
I don't miss an occurrence of the searched word.
When you combine these two "problems" it makes Find/Replace more cumbersome.
Find/Replace in Files does not suffer this problem.
Regards
Kuan Hsu that seems to work and sofar so good.
Just an observation:
When searching for a word (Find/Replace), the Routine/Function name window does not update.
So, if I have left the cursor in another routine I expected the cursor to follow the search steps to each word
and thus updating the Routine name window.
The search function fails when a routine is collapsed, so I have to expand all the routines to make sure
I don't miss an occurrence of the searched word.
When you combine these two "problems" it makes Find/Replace more cumbersome.
Find/Replace in Files does not suffer this problem.
Regards
Re: FreeBasic IDE-poseidonFB(Update 2018.07.26)
That's great!!!!Dinosaur wrote:Hi All
Kuan Hsu that seems to work and sofar so good.
But use "Codecomplete" still crash and heavy lag?
Please try rev0.403Dinosaur wrote: Just an observation:
When searching for a word (Find/Replace), the Routine/Function name window does not update.
So, if I have left the cursor in another routine I expected the cursor to follow the search steps to each word
and thus updating the Routine name window.
The search function fails when a routine is collapsed, so I have to expand all the routines to make sure
I don't miss an occurrence of the searched word.
When you combine these two "problems" it makes Find/Replace more cumbersome.
Find/Replace in Files does not suffer this problem.
Regards
Re: FreeBasic IDE-poseidonFB(Update 2018.08.10)
Hi All
Thanks for that, that works good now.
I will play around with the settings and report back.
Regards
Edit: Deleted
Thanks for that, that works good now.
I will play around with the settings and report back.
Regards
Edit: Deleted
Re: FreeBasic IDE-poseidonFB(Update 2018.08.10)
Hi All
Kuan Hsu can you make the "Search/Replace" default to ignore case OR save the last setting.
As FB is generally case insensitive, should it not default to that ?
Regards
Kuan Hsu can you make the "Search/Replace" default to ignore case OR save the last setting.
As FB is generally case insensitive, should it not default to that ?
Regards